Nativescript

To get a scanner up and running, the first thing to do, is to call the loadScanner() method. It expects a CMBReaderConstants.DEVICE_TYPE param. This method does not connect to the Reader Device. We need to call connect() in the callback to actually connect to the Reader Device

this.cmb.loadScanner(CMBReaderConstants.DEVICE_TYPE.MXReader)
    .then(result => {
        this.cmb.connect()
            .then(result => {
                ...
            })
            .catch(err => {
                console.log(err);
            });
    });

/*   @return 
    (promise)  {
        status : boolean, if connection succeeded true if not false
        err : string , if status false err will not be null
    }
*/ 

The result from the connect() method is returned as a Promise and it will contain the result of the connection attempt:

this.cmb.connect()
    .then(result => {
        ...
    })
    .catch(err => {
        console.log(err);
    });

There is an Event Listener for the connection status of the ReaderDevice, namely the CMBReaderConstants.EVENTS.ConnectionStateChanged event which is explained in more detail below.

/*   @return 
    (promise)  {
        status : boolean, if disconnect succeeded true if not false
        err : string , if status false err will not be null
    }
*/ 

Just as there is connect(), there is a disconnect() method that does the opposite of connect() :

this.cmb.disconnect();

Similarly to connect(), disconnect() also triggers the CMBReaderConstants.EVENTS.ConnectionStateChanged event.

/*   @return Promise
      (bool) value of the Scanner Activity (true if the command was successful, false otherwise ex: if readerDevice not initialized)
*/

To start / stop the scanning process, we use these methods. They return a promise, which will be resolved if the command was successful (the scanning has started or stopped) or rejected otherwise (if there is no active ReaderDevice initialized or isn't connected).

After starting the scanner and scanning a barcode, the scan result triggers the CMBReaderConstants.EVENTS.ReadResultReceived event.

Once there is a connection to the Reader, we can enable symbologies by calling setSymbologyEnabled(). It expects three params: a CMBReaderConstants.SYMBOLOGY which is the symbology to be enabled or disabled and a boolean for ON/OFF.

this.cmb.setSymbologyEnabled(CMBReaderConstants.SYMBOLOGY.DataMatrix, true)
    .then(function (result) {
        if (result == true)
            console.log("DataMatrix enabled");
        else
            console.log("DataMatrix NOT enabled");
    })
    .catch(function (err) {
        console.log(err);
    });

To check if we have a symbol enabled, we use isSymbologyEnabled(). It takes argument CMBReaderConstants.SYMBOLOGY.

cmb.isSymbologyEnabled(CMBReaderConstants.SYMBOLOGY.QR).then(function (result) {
        if (result == true)
            console.log("DataMatrix enabled");
        else
            console.log("DataMatrix NOT enabled");
    })
    .catch(function (err) {
        console.log(err);
    });

/*   @return 
    (promise)  {
        status : boolean, true if successfully executed command
        err : string , if status false err will not be null
    }
*/ 

If we want to enable the flash we can use setLightsOn(). It expects one argument boolean and returns a promise.

/*   @return 
    (promise)  {
        status : boolean, true if lights are on, false otherwise
        err : string , in case of error (e.g. reader not initialized)
    }
*/ 

We can check the lights status with isLightsOn(), which returns a promise.

/**
@return A promise that resolves with the CMBReaderConstants.CONNECTION_STATE value of the current reader device
*/

If you need to get the current connection state, getConnectionState() can be used

this.cmb.getConnectionState().then(function(connectionState){
  if (connectionState == CMBReaderConstants.CONNECTION_STATE.Connected) {
  		// reader is connected
  }
});

This should be used only when using the device's built in camera for scanning (CMBReaderConstants.DEVICE_TYPE.Camera).

This function expects one integer argument that is a result of the OR-ed result of all the preview options that we want enabled.

this.cmb.setPreviewOptions(CMBReaderConstants.CAMERA_PREVIEW_OPTION.NoZoomBtn | CMBReaderConstants.CAMERA_PREVIEW_OPTION.NoIllumBtn);

Note: PreviewOptions should be set BEFORE we call loadScanner() for it to take effect.

This should be used only when using the device's built in camera for scanning (CMBReaderConstants.DEVICE_TYPE.Camera).

setPreviewContainerPositionAndSize takes an array argument with four integer objects, which are the X and Y values for the top left coordinate, and width and height values for the preview container size. All of the values are percentages of the device's screen.

this.cmb.setPreviewContainerPositionAndSize([0,0,100,50]);
//will set the preview to 0,0 and 100% width 50% height

This should be used only when using the device's built in camera for scanning (CMBReaderConstants.DEVICE_TYPE.Camera).

Sets the camera preview to start in full screen instead of partial view.

this.cmb.setPreviewContainerFullScreen();

Used to enable / disable image result type. Expects one boolean argument.

this.cmb.enableImage(true);

Used to enable / disable svg result type. Expects one boolean argument.

this.cmb.enableImageGraphics(true);

Enable or disable parsing for scanned barcodes. Expects one argument of type CMBReaderConstants.RESULT_PARSER.

this.cmb.setParser(CMBReaderConstants.RESULT_PARSER.GS1);

Set encoding for the readString result type. Expects one argument of type CMBReaderConstants.READSTRING_ENCODING.

this.cmb.setReadStringEncoding(CMBReaderConstants.READSTRING_ENCODING.UTF_8);

/*   @return 
    (promise)  {
        value : int
        err : string , in case of error (e.g. reader not initialized)
    }
*/ 

Method to show the battery level of the connected device. Doesn't take any arguments.

All the methods can be replaced with sending DMCC strings to the READER device. For that we can use our API method sendCommand. It can be used to control the Reader completely with command strings. It takes two string arguments, first of which is the DMCC itself, and the second one is to identify it in the response event. 

More on the command strings can be found here or here.

this.cmb.sendCommand("GET DEVICE.TYPE")
    .then(function (result) {
        console.log(result);
    })
    .catch(function (result) {
        console.log(result);
    });

Available only on iOS.

Used for creating authentication credentials used for MDM reporting. It takes four string arguments: username, password, clientID and clientSecret.

Should be called before setMDMReportingEnabled.

More on the MDM Reporting can be found here

this.cmb.createMDMAuthCredentials("username", "password", "clientID", "clientSecret"); 

Available only on iOS.

A company owning and operating many Cognex Mobile Terminals may want to remotely collect up-to-date information about battery level, battery health, installed firmware, etc.

An iOS application using the cmbSDK framework can report status information of the attached Mobile Terminal to an MDM instance. This can be enabled with the setMDMReportingEnabled method that accepts one boolean argument.

More on the MDM Reporting can be found here

this.cmb.setMDMReportingEnabled(true);

The cmbSDK plugin emits Events that can be used in the application.

First, create the event emitter:

import NativeModules.NativeEventEmitter;
const scannerListener = new NativeEventEmitter(cmb);

and then add listeners for each event you want to handle:

this.cmb.on(CMBReaderConstants.EVENTS.AvailabilityChanged, (args: any) => {
    if (args.data == CMBReaderConstants.AVAILABILITY.Available) {
        this.cmb.connect();
    } else {
        dialogs.alert({
            message: "Device became unavailable",
            okButtonText: "OK"
        });
    }
});

Here are all the events that the cmbSDK plugin can emit:

CMBReaderConstants.EVENT.ReadResultReceived
CMBReaderConstants.EVENT.AvailabilityChanged
CMBReaderConstants.EVENT.ConnectionStateChanged
CMBReaderConstants.EVENT.ScanningStateChanged

CMBReaderConstants.EVENT.ReadResultReceived
This event is triggered whenever a scan result is received. A result is a CMBReadResults object (see CMBReadResults class reference).

CMBReaderConstants.EVENT.AvailabilityChanged
This event is triggered when the availability of the ReaderDevice changes (example: when the MX Mobile Terminal has connected or disconnected the cable, or has turned on or off). The result is an int containing the availability information.

CMBReaderConstants.EVENT.ConnectionStateChanged
This event is triggered when the connection state of the ReaderDevice changes. The result is an int containing the connection information.

CMBReaderConstants.EVENT.ScanningStateChanged
This event is triggered when the scanner state of the ReaderDevice changes. The result is a boolean that is true if the scanning started, or false if it stopped.